Price Includes Shipping
Approx Lead Time 10-14 days.
An everyday wear belt built on a double layer of stiff TypeN450 scuba webbing that's fully wrapped with a 1" webbing adjustment strap and fastened with the AustriAlpin Cobra Buckle. This belt is stitched together with five rows of bonded nylon thread. The standard configuration uses hook and loop adjuster strap management. Adjustment range is approximately 4"-5"
Sizing is based off your actual waist measurement (over your pants) and not your pants size! (Outer range belt use should measure over your pants belt. SEE BELOW)
Please note that when using as an outer belt with your existing inner belt we ask that you please measure around your waist over top of the inner belt for sizing (normally 2-3 inches more than your waist measurement). Same goes for when using as an inner belt for a padded battle belt/or belt sleeve. Note your intended use in the special instructions when ordering for this type of application. Battle belt use can be upwards of 4 -6" longer.
HOOK & LOOP is more commonly called Velcro, which is a brand of hook/loop (hook is the rough side, loop is the softer side). Lining a belt with either means you're covering the inside or outside with that material. If you select the "Velcro style" tag end management, we cannot line the outside portion of the adjuster strap that folds back over onto itself. The layers of hook and loop make it to hard to thread the adjustment strap through the buckle.
All belts are built tough but are NOT intended for climbing, suspending or repelling.
We are a very small operation that builds one order at a time. This allows us to cater to special needs or perform modifications to our existing products options. If you need something tweaked or added to an item Contact Us first and we will offer further instructions PRIOR to placing an order. See our Policies section for information on our warranty, returns and exchanges.